Choosing Upvc Window Replacement Hinges
Choosing and fitting upvc window replacement hinges isn't as complicated as you may think. Check that the arrows on the hinges face in the correct direction, and then measure the thickness of the hinge arms on the opening frame (13mm or17mm).
There are a few different types of hinges to choose from, each with unique characteristics. This article will discuss the most common kinds of uPVC window hinges and the advantages they offer.
Egress/Easy Clean Hinge
They are an excellent choice for replacing or upgrading the fire escape safety window, as they are able to open at a 90-degree angle. They can also be disengaged to an 'easy clean' position so that you can easily access the outside of your windows to clean them without having to climb a ladder or lean over at angles that could be dangerous.
Yale is one of the most trusted and well-known brands in the world of home security. These hinges are suitable for any kind of uPVC side-hung window. They can be moved into the easy-to-clean position by pressing in a small button and then sliding the window sash over to one side. When the sash is closed, it will automatically return to its original operative position.
They are available in 13mm and 17mm stack heights. Depending on the size of your window we recommend using our Egress Selection Guide to determine which one is the best fit for your needs.
These hinges can be used with standard side-hung frames made of uPVC, or aluminium. The friction screw is used to adjust the resistance. This makes opening the windows easier and reduces the chances of accidental closing during high winds. They have been tested for over 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
There are no buttons or catches the Nico Egress Easy Clean Friction Hinge is easy to use and provides a convenient solution to emergency egress as well as safe cleaning. The hinge retention clip is located in the inner corner of the bottom corner. This will release the top and bottom catches and allow you to slide the sash back into the clean position. Close the window once you are in the easy-cleaning position. This will reset the hinges to their egress positions.
Fire-Escape Hinge
Fire Escape Hinges (also known as "Easy Clean") are used to replace windows with side openings to protect against fire. These types of hinges are more spacious and more efficient than standard hinges to allow an open space to escape in the case of an emergency fire. This type of hinge is a legal requirement in any room that has a window, as stipulated by building regulations.
The windows have the benefit of a friction stop that allows the windows to open up to a 90-degree angle. They also let the opening sash slide across the glass when opened, allowing for simple cleaning without the need to climb ladders. The hinges are simple to operate and don't have complicated buttons or catches. They can be operated from inside of the home using a safe, simple lever.
The hinges are produced in the UK by Cotswold and come with a child safety restraint for day-to-day use which can be turned off by a hidden button, giving you peace of thought that your children will not accidentally open the door too far. They are available in 13mm and 17mm stack heights.
Find the length of the existing side-hung window hinge that is attached to the frame. (See the article on measuring the length of upvc window hinges). Then select the correct size hinge from the selections below.
Note that this measurement is taken at the hinge's point that connects to the frame and not the sash. The actual hinge length could be shorter or longer dependent on how the windows were originally made. When deciding on the width of the hinge, most frames made of upvc will have with a height of 13mm however if your original window frame is 17mm, choose this option. Alternately, you can install the 4mm packer to make up the difference. All hinges come handed (1 left and 1 right). Screws aren't included with the hinges. If required, these screws can be purchased separately. We recommend using our upvc window hinge repair screws. These are specially made to improve the performance of your hinges that allow them to run smoothly for longer. They have a reduced-friction design and a more durable weather seal, which includes caps made of nylon.
Restricted Hinge
There are occasions when a window needs to fully open and this can be difficult with a standard hinge. These child safety friction hinges are a fantastic solution to this issue. They can be used in situations where ventilation is needed but escaping or cleaning a fire is not possible. They work by restricting the amount the sash can open and allowing the override of this restriction with a button. They are suitable for both side and top-hung windows and are available in 17mm and 13mm stack heights.
The Nico Restricted Egress Friction hinge combines the features of a standard restrictor with a fire escape hinge to provide an efficient and easy way to comply with building regulations. It is suitable for side hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It comes in a pair that has one hinge which is the restricted egress, and the other the unrestricted. This permits one hinge to be installed at the bottom while the other is installed at the top.
These uPVC hinges are designed to be used on windows that aren't able to be fully opened, for instance the bedroom of a child. The mechanism limits the extent to which the sash can open to 100mm for safety and re-engages once the window is closed.
These uPVC friction-type hinges can be used on all kinds of windows. They are particularly useful for windows that are hard to reach, such as those in three-storey apartments or those which would require ladders. They can be combined by our security enhancements such as hinge guard protection plates or dog bolts to provide PAS 24 performance.
When replacing a window hinge it is important to measure the length of the existing hinge so you can purchase replacements that are similar in size. This can be accomplished by looking through the image gallery of the hinge before deciding where you would like it to be. The hinges that hang from the top can only be placed on one side, while the side hung ones can only be put on one side.
Standard Hinge
A standard hinge uses metal-to-metal contacts and has no additional parts to decrease friction. It is available in a variety of finishes and is also fire-rated. To quickly determine window hinge repairs RepairMyWindowsAndDoors of hinges, lay them out flat and align a quarter and dime in two corners. If the dime fits better and the corner is round by 1/4 inch. If the quarter fit better, it's rounded to 5/8 inch.
Choosing the right type of hinge can make or break your door's appearance. Achieving the same style and design of your hinges with your door will give it an attractive and well-integrated design.